Tutorials

Use Tutorial

1. Powering on and off (make sure it is charged first)

• To awaken from deep sleep mode, hold the button for 4seconds.
• To turn it off, press and hold the button for 4 seconds.
• To put the saber in deep sleep mode, press and hold the button for 8seconds.
• To turn the saber on, press the button for 1 second.
• Swing on, When the saber is on standby, swing the handle to turn on the saber.

2. Changing blade color (saber must be turned on)

• Press the button for 2seconds and release your finger. Click the button to change color.
• Press the button for 3seconds and release your finger. The blade color is automatically

cycled, click the button to select the color you like.

3. Lightsaber effects (saber must be turned on)

• Blaster sound: Tap the button.
• Lock-up loop: Press the button for 1 second and release your finger. Then press the

button to activate lock up. Press it again to end the lock up loop.

• Flash-on-clash: The saber will automatically flash white and emit a sound when it hits

another surface.

4. Sound effects (saber should be off)

• Changing sound fonts: Press the button for 2 seconds to change the sound font. Repeat

to cycle through the sound fonts.

• Adjusting volume: Press the button for one 1 second to adjust the volume.

5. Breathing light when charging

When charging, the button will have a breathing light effect.

 

Saber Assembly Tutorial

6. Creating a double-bladed saber

• Make sure you have two saber hilts of the same style. Unscrew the bottom of one of the

hilts. Screw in the other hilt tightly.

• To undo, unscrew the other hilt and re-attach the bottom.

7. 7. Adding and removing the blade

• Use the tools provided to loosen the screws in the hilt.